Install Articles

»»Install Articles

Two New Kits from PBH for your Coyote Swap!

We have released two new kits to help source the parts you need for your Coyote Swap. Both kits are packed with all new Ford OEM hardware and components. First we have a Flexplate kit for Coyote and Modular Ford 6R80 cars. In it you get a brand new Coyote Flexplate that is 8bolt. This [...]

2018-12-07T20:48:38+00:00

National Speed shows of their Coyote Swap Skills

We get to work with a lot of great builders and installers all the time due to our Coyote Swap product lineup. National Speed is just one more that has put together a great build for a customer utilizing our products. In this case a Reef Blue Fox Mustang is the benefactor of a [...]

Our Coyote Swap Bracket Lineup Is About To Get Even Better

Our Coyote Swap Accessory Bracket lineup has been used by many on different builds. From Fox Mustangs, Airboats, Street Rods, Muscle Cars, Restomods, and on and on. One of the reasons they have been so suited to these builds is that not only do we offer a Power Steering solution for Naturally Aspirated engines, but [...]

How to swap out the oem one way clutch alternator pulley with the PBH clutchless pulley

We have been asked several times for tips on removing the oem One Way Clutch type alternator pulley found on 2011-up Mustang Alternators. You may ask why would you change the alternator pulley in the first place? In some cases you might get lucky enough to get an alternator from an automatic car that does [...]

New product availble from PBH for your Coyote Swap

The cooling system on the Coyote  engine is compatible with most vehicles. We find that if you have a heater, your really just need stock coyote heater hoses to connect to your heater core. If you are not running a heater that is where the fun begins. Typically one would have to modify the driver [...]

PBH Coyote Swap Brackets on a Gen 3 Coyote

Recently the team from Mustang Monthly Magazine was part of the 2018 Week To Wicked Mustang build. Mark Houlahan(seen in the video) and Mike Johnson are editors for the known publication. The build was a 1967 Fastback which was treated to a all new 2018 5.0L Coyote for power. This is cutting edge stuff as [...]

2018-10-15T19:13:50+00:00

Maximum Motorsports Roll Cage Build

We recently got the call to put together a tech article with our friends at Race Pages with a Maximum Motorsports roll cage. Having done several MM roll bar/cage installations in the past we jumped at the opportunity to outfit one of our customers with a kick ass setup. Gus Germi got the call as [...]

2017-02-14T17:24:31+00:00

PBH 6R80 Powertrain Control Packs are shipping and hitting the track!

The Power By The Hour Performance 6R80 Powertrain Control Pack is in stock and shipping daily. Some of our customers have already installed the systems and began tuning. Bobby Grasch of New Berlin, Wisconsin recently got the PCP isntalled and tuned via Lund Racing. He has sent us a video of the car cutting a [...]

2016-11-11T17:01:25+00:00

Ron’s Supercharged Coyote Swapped Boss Shinoda

Ron's Boss Shinoda came to us already well on its way as a performance build. Sporting a Sean Hyland built 4.6L 3v and a Vortech Supercharger, the Boss was making a hint over 600rwhp through the manual transmission. We opted to swap out the manual for a Lenntech built 4R70w auto and made the car [...]

2016-11-11T17:01:25+00:00

Gus’s 800rwhp #PBHBUILT GT

The GT featured in this newsletter has been an ongoing project for a few years now. Gus came to use for some NA work where we did a CJ intake with PBH CAI with Comp stage 3 cams. We were able to squeeze out 480rwhp from that combo. Later we got Gus hooked up with [...]

2016-11-11T17:01:25+00:00
March 2019
M T W T F S S
« Feb    
 123
45678910
11121314151617
18192021222324
25262728293031