Coyote Swap Gauges

  • SPEEDOMETER SIGNAL INTERFACE

    $89.99

    3 left in stock

    When using our Powertrain Control Pack's or harnesses you will have a direct speedometer signal blunt lead. These blunt lead's will provide the factory speedometer signal which does not work direct on any aftermarket or even older oem instrument clusters. The signal needs to be converted to whatever the present speedometer gauge uses for its reading. Dakota Digital offers this box and it makes the conversion really easy which is why we offer it. Input the oem signal from the harness and adapt it to whatever your gauge needs to get the speedometer working perfect. From the Manufacturer: The Universal Signal Interface Unit can handle nearly all of your electric speedometer signal conversion and calibration issues. It can recalibrate a 2,000 pulse per mile (ppm) through 250,000ppm electronic speedometer pulse rates, either up or down. It is great for adjusting aftermarket and OEM electric speedometers on vehicles after changing rear end gears, tire sizes, or drivetrain changes affecting the speedometer. The converter is used as either a signal multiplier (up to 16X) or signal divider (up to 125X), making this unit extremely flexible for almost any application. While the converter is intended to correct only the signal feeding the electronic speedometer, in many cases where a speed signal is shared or on a databus, the box can instead correct the signal feeding the engine and transmission computers. For even greater flexibility, it allows multiplication up to 16x, taking an 8,000 ppm signal and converting to a 128,000ppm output, and includes a regulated 5V sensor output, allowing use of the Dakota Digital SEN-01-5 speed sensor. A built-in LED display and pushbutton switches simplify setup and calibration. **** If your vehicle is equipped with an anti-lock braking system (ABS), it is advised to ensure the signal reaching the ABS controller is not altered to eliminate any potential problems affecting control algorithms within the system. Some vehicles also utilize the output shaft speed to calculate transmission slip and lock-up. When a signal feeding the PCM is altered, this may cause the PCM to detect a constant slip. Consulting a service manual may be of assistance in determining the signal routing within the vehicle if the SGI-5 is decided to be used in a situation such as this. *** Unit measures 4" x 2" x 1" and is designed to be mounted inside a vehicle. PRODUCT INSTRUCTIONS  
  •      PBH brings you Coyote Swap specific gauge options from the leaders in high performance gauges; Dakota Digital. We have worked with DD to put together kits to make your swap that much easier.

    This gauge pack comes with not only state of the art gauges but a new message center to display even more information. This HDX kit cleans up all the wiring to the cluster by incorporating all connections into one module. A single connector plugs into the cluster communicating all the information.

    Want to step it up for your Coyote Swap, add on our expansion pack and pick up signals direct from the Coyote PCM for water temp, rpm, voltage, and much more. Our expansion pack also comes with GPS sensor for speedometer. Say goodbye to dialing in the perfect speedometer reading, now it does not matter the tire size or gearing as the cluster sees it right from your GPS sensors.

    All kits ship free in the continental USA FOR ALL COYOTE SWAP APPLICATIONS IT IS HIGHLY RECOMMENDED THAT YOU ALSO PURCHASE THE OBDII BIM MODULE FOUND IN THE LINK BELOW.   
  • We like to take the guess work out of things. If you are purchasing your Dakota Digita VHX or HDX gauges from us you will want to make connectivity a breeze. Dakota Digital makes it easy to get the usable information from your Coyote pcm and feed it to your gauges. The BIM module plugs right into the OBDII port and pulls all the usable info for the gauge to see. The GPS module will supply accurate speed to the cluster no matter what tire or gear you have installed on the car or truck. Combine the two and plug them all with Dakota Digital BIM module expansion ports to make upgrading your gauges to the most up to date info. *if doing a swap with 6r80 or 10r80 the gps module is not required for speed, cluster will pull speed from the pcm with BIM expansion module alone. INSTRUCTIONS FOR USE OF GPS MODULE WITH BIM MODULES AND GAUGES
  •      PBH brings you Coyote Swap specific gauge options from the leaders in high performance gauges; Dakota Digital. We have worked with DD to put together kits to make your swap that much easier.

    This gauge pack comes with not only state of the art gauges but a new message center to display even more information. The base VHX kit cleans up all the wiring to the cluster by incorporating all connections into one module. A single connector plugs into the cluster communicating all the information.

    Want to step it up for your Coyote Swap, add on our expansion pack and pick up signals direct from the Coyote PCM for water temp, rpm, voltage, and much more. Our expansion pack also comes with GPS sensor for speedometer. Say goodbye to dialing in the perfect speedometer reading, now it does not matter the tire size or gearing as the cluster sees it right from your GPS sensors.

    All kits ship free in the continental USA FOR ALL COYOTE SWAP APPLICATIONS IT IS HIGHLY RECOMMENDED THAT YOU ALSO PURCHASE THE OBDII BIM MODULE FOUND IN THE LINK BELOW.   
  •  PBH brings you Coyote Swap specific gauge options from the leaders in high performance gauges; Dakota Digital. We have worked with DD to put together kits to make your swap that much easier.

    This gauge pack comes with not only state of the art gauges but a new message center to display even more information. The base VHX kit cleans up all the wiring to the cluster by incorporating all connections into one module. A single connector plugs into the cluster communicating all the information.

    Want to step it up for your Coyote Swap, add on our expansion pack and pick up signals direct from the Coyote PCM for water temp, rpm, voltage, and much more. Our expansion pack also comes with GPS sensor for speedometer. Say goodbye to dialing in the perfect speedometer reading, now it does not matter the tire size or gearing as the cluster sees it right from your GPS sensors.

    All kits ship free in the continental USA FOR ALL COYOTE SWAP APPLICATIONS IT IS HIGHLY RECOMMENDED THAT YOU ALSO PURCHASE THE OBDII BIM MODULE FOUND IN THE LINK BELOW.   
  •      PBH brings you Coyote Swap specific gauge options from the leaders in high performance gauges; Dakota Digital. We have worked with DD to put together kits to make your swap that much easier.

    This gauge pack comes with not only state of the art gauges but a new message center to display even more information. The base VHX kit cleans up all the wiring to the cluster by incorporating all connections into one module. A single connector plugs into the cluster communicating all the information.

    Want to step it up for your Coyote Swap, add on our expansion pack and pick up signals direct from the Coyote PCM for water temp, rpm, voltage, and much more. Our expansion pack also comes with GPS sensor for speedometer. Say goodbye to dialing in the perfect speedometer reading, now it does not matter the tire size or gearing as the cluster sees it right from your GPS sensors.

    All kits ship free in the continental USA FOR ALL COYOTE SWAP APPLICATIONS IT IS HIGHLY RECOMMENDED THAT YOU ALSO PURCHASE THE OBDII BIM MODULE FOUND IN THE LINK BELOW.   
  •  PBH brings you Coyote Swap specific gauge options from the leaders in high performance gauges; Dakota Digital. We have worked with DD to put together kits to make your swap that much easier.

    This gauge pack comes with not only state of the art gauges but a new message center to display even more information. The base VHX kit cleans up all the wiring to the cluster by incorporating all connections into one module. A single connector plugs into the cluster communicating all the information.

    Want to step it up for your Coyote Swap, add on our expansion pack and pick up signals direct from the Coyote PCM for water temp, rpm, voltage, and much more. Our expansion pack also comes with GPS sensor for speedometer. Say goodbye to dialing in the perfect speedometer reading, now it does not matter the tire size or gearing as the cluster sees it right from your GPS sensors.

    All kits ship free in the continental USA FOR ALL COYOTE SWAP APPLICATIONS IT IS HIGHLY RECOMMENDED THAT YOU ALSO PURCHASE THE OBDII BIM MODULE FOUND IN THE LINK BELOW.   
August 2019
M T W T F S S
« Jul    
 1234
567891011
12131415161718
19202122232425
262728293031