Now available from PBH for Coyote Swap builds are starter shims. These shims can be used to align the starter engagement to the flywheel. Typically the clearances on aftermarket bell housings are a little off and the starter can get stuck due to over engagement. Typically you would use washers to shim the starter out to correct the issue but washers tend to be different thicknesses and can rattle when loose. We designed our shims to be even all the way around to give the starter motor an even surface to mount to. They are sold in a kit with one .060 and one .080 shim included.

*works on all modular ford starter motors