A PBH exclusive with FREE shipping to anywhere in the Continental USA!
We have developed a Coyote Swap specific Front Feed Whipple Supercharger kit. The foundation of the kit is a Gen3 2.9L Front Feed Supercharger from Whipple. The supercharger is a solid performer for applications looking to make 550-1000rwhp and more. Packed in our base kit is a 2.9L Whippple supercharger with a matching 132mm eliptical throttle body, Cold Air Kit, Fuel Rails, jack shaft cover, supercharger pulley, Lower Manifold with Intercooler, and installation kit. Additionally PBH packs its own Accessory drive kit which adds brackets for the Coyote Alternator, Idler Pulleys, Power Steering Pump, and AC Compressor just like all of our Coyote Swap Accessory Drive kits. Additionally both tensioners, hardware, belts, and detailed instructions are also included. Our Coyote Swap Whipple Supercharger kit is customized specifically for Coyote Swaps. We omit a series of items that are not needed during the installation of our Accessory Drive kit which saves you $MONEY$. This combo is the most cost effective way to get a brand new supercharger for your coyote swap!
Since this is a tuner kit we do not include tuning of fuel system components. We allow you to select what you need to set your swap up. All PBH Whipple Supercharger kits come with the 3.75 upper pulley which will make 10-11psi. On 93 octane this combo with Lund Racing tune and 132mm throttle body regularly makes 600+rwhp. We offer injector packages for both 93 octane and higher performing E85 as options. PBH includes both the 132mm Eliptical throttle body and a 123mm mass air meter housing with air filter and intake tube. The Lund Racing tuning package is also optional and highly recommended to ensure your project drives and performs as intended.
Once you have selected your fuel system pieces you can option to add a PBH custom heat exchanger package. All the Whipple Superchargers come with a water to air intercooler so a heat exchanger is needed to complete the system. Since most of the swaps are custom we offer you the kit without one and offer a selection of parts to get the job done. None of the kits are vehicle specific although we do mention which cores are may fit better on certain chassis. It is always recommended to measure the available area on your project to ensure the unit selected will fit. We include an all aluminum heat exchanger, intercooler pump, hoses, unions, clamps, and reservoir(as needed).
We are ready to work with you to ensure you order the parts that are needed to make your swap a success. If you find you have questions, please call or email us directly.
If Shipping outside of the USA please call or email for info.
Want to add a Heat Exchanger kit:? Click below to see what we have for you